Meet Our Staff | Philadelphia, PA | McCollum Insurance Agency
I had a schedule most every day with a station in New Hampshire. The pole snaped at the base from the high winds. I could work within 3 kc of his al and not be bothered, that is about the width of the 6 meter USB al. With a view of about 0 miles in most directons except north. I would have a constant range of some miles in all directions.
The pole snaped at the base from the high winds. The "Ameco-TX86" is shown in the picture above my left shoulder with the copper color front with the meter.
This antenna was mounted on my garage. As you guessed it, I installed another utility pole in our back yard and rebuilt the 6 meter "H" Array, but this time since I had more room, I made it "Larger".
I applied for a new ham call as it was the required thing to do at that time. Pennsykvania the above picture you can see the Swan transiver and the "Collins RA" Receiver mounted in the rack on the right.
Amateur message erie pennsylvania Horny Granny Ready Sexy Fucking Truth Be Told Looking For A Bad Bitch
Also had scheduled contacts to Albany, NY. The saying is: "If the antenna does not come down in the wind, it is too small: Hi Hi So Now: I had to rebuild the whole antenna system all over again, but this time stronger. Another 6 meter ham moved in about 2 blocks away from pensylvania. While living in this apartment I bought an "Ameco TX" transimitter in kit form. Left Pic. Thats me sitting on the floor working on my ham gear. Above picture is a picture of my "Swan I bought back in the 60s which I currently have and use occasionally.
That is me in the picture in Depew, NY. I don't remember what year it was but I bought a Swan Matching harness is all "Homebrew". The only thingI did to it was to add an outboard "S-Meter". The antenna raises and lowers on a 4 inch I beam mounted on the pennsyllvania with a volt ac reverserable motor attached to an 80 to 1 gear box mssage at the base of the pole. The beam width is about 14 deges at the widest point. Thats me sitting on the floor working on my ham gear.
Aria Pennsylvania Massage Erie Pennsylvania Porn Videos | cptcertification.club
The final was a with 90 watts output on am. My call letters at that time were: WA2WSE At the base of the pole I mounted a gear box with winch which I could raise and lower the antenna to work on it or bring it down in any high winds. The antenna raises and lowers on a 4 amateur message erie pennsylvania I beam mounted on the pennsylvannia with a volt ac reverserable motor attached to an 80 to 1 gear box located at the base of the pole.
Front to back ratio is 25 to 1.
for : amateur porn Erie Pennsylvania brunette real
I also played around with a homebrew 11 element 6 meter beam on a 54 foot boom which also did a great job. The "Ameco-TX86" is shown in the picture above my left shoulder with the copper color front with the meter. Picture of my large "Prop Pitch Motor" to rotate the 6 meter antenna. I purchased an Ameco 6 meter converter along with pennsyovania "Collins RA" receiver.
My best 6 meter mobil contact from the car was with a station in California, USA. But one day, while I was on the air 6 Meters we had a severe thunderstorm come through the area with plenty of wind and knocked my large 6 meter array down.
'amateur porn Erie Pennsylvania teen hidden' Search - cptcertification.club
I erected a 30 foot telephone pole in my back yard. Forward gain is about 20 to pennsylgania db. I had a lot if fun with this rig. I also erected a "Homebrew" 10 meter vertical. The booms are 40 feet long.
I installed a hand crank at the base of the pole. I mounted a 4 inch I beam on the pole and mounted a mount which looked like a small elevator attached to 4 Inch I beam.
I used good quality " ohm line" for the transmission line, To rotate the antenna I put a call out on the ham radio that I was looking for a "Prop Pitch Motor". The booms are 40 feet long.
Resultados para : amateur porn Erie Pennsylvania teen cam
To make the matching harness: I used No. In we bought our first home in Dewpew, NY.
Left Pic. In we bought our first home in Dewpew, NY. Also, had contacts with stations in Cleveland, Ohio, Philadelphia, Pa. This was my first kit which that I put together. Front to back ratio is 25 to 1.